Search: in Tutorials Encyclopedia Videos Books Software DVDs Conway chained arrow notation Encyclopedia
 Tutorials Encyclopedia Videos Books Software DVDs

## Conway chained arrow notation

Conway chained arrow notation, created by mathematician John Horton Conway, is a means of expressing certain extremely large numbers. It is simply a finite sequence of positive integers separated by rightward arrows, e.g. 2   3   4   5   6.

As with most combinatorial symbologies, the definition is recursive. In this case the notation eventually resolves to being the leftmost number raised to some (usually enormous) integer power.

## Definition and overview

A Conway chain (or chain for short) is defined as follows:

• Any positive integer is a chain of length 1.
• A chain of length n, followed by a right-arrow and a positive integer, together form a chain of length n+1.

Any chain represents an integer, according to the four rules below. Two chains are said to be equivalent if they represent the same integer.

If p and q are positive integers, and X is a subchain, then:

1. The chain p represents the number p.
2. p \to q represents the exponential expression p^q.
3. X \to p \to 1 is equivalent to X \to p.
4. X \to p \to (q + 1) is equivalent to X \to ( X \to ( \cdots (X \to ( X ) \to q)\cdots ) \to q ) \to q
(with p copies of X , p − 1 copies of q , and p − 1 pairs of parentheses; applies for q > 0).

Note that the last rule can be restated recursively to avoid the ellipses:

4a. X \to 1 \to (q + 1) = X
4b. X \to (p + 1) \to (q + 1) = X \to (X \to p \to (q+1)) \to q

## Properties

1. A chain of length 3 corresponds to Knuth's up-arrow notation and hyper operators:
\begin{matrix} p \to q \to r = \text{hyper}(p,r+2,q) = p \!\!\! & \underbrace{ \uparrow \dots \uparrow } & \!\!\! q = p\uparrow^r q.\\ & \!\!\! r \text{ arrows} \!\!\! \end{matrix}
2. a chain X   Y is of the form X   p; hence:
3. a chain starting with a is a power of a
4. a chain 1   Y is equal to 1
5. a chain X   1   Y is equal to X
6. a chain 2   2   Y is equal to 4
7. a chain X   2   2 is equal to X   (X) (chain X with its value concatenated to it)

## Interpretation

One must be careful to treat an arrow chain as a whole. Arrow chains do not describe the iterated application of a binary operator. Whereas chains of other infixed symbols (e.g. 3 + 4 + 5 + 6 + 7) can often be considered in fragments (e.g. (3 + 4) + 5 + (6 + 7)) without a change of meaning (see associativity), or at least can be evaluated step by step in a prescribed order, e.g. 234 from right to left, that is not so with Conway's arrow.

For example:

• 2\rightarrow3\rightarrow2 = 2\uparrow\uparrow3 = 2^{2^2} = 16
• 2\rightarrow\left(3\rightarrow2\right) = 2^{(3^2)} = 2^{3^2} = 512
• \left(2\rightarrow3\right)\rightarrow2 = \left(2^3\right)^2 = 64

The fourth rule is the core: A chain of 3 or more elements ending with 2 or higher becomes a chain of the same length with a (usually vastly) increased penultimate element. But its ultimate element is decremented, eventually permitting the third rule to shorten the chain. After, to paraphrase Knuth, "much detail", the chain is reduced to two elements and the second rule terminates the recursion.

## Examples

Examples get quite complicated quickly, here are small examples:

n

= n (by rule 1)

p q

= pq (by rule 2)
Thus 3 4 = 34 = 81

1 (any arrowed expression)

= 1 since the entire expression eventually reduces to 1number = 1. (Indeed, any chain containing a 1 can be truncated just before that 1; e.g. X 1 Y=X for any (embedded) chains X,Y.)

4 3 2

= 4 (4 (4) 1) 1 (by 4) and then, working from the inner parentheses outwards,
= 4 (4 4 1) 1 (remove redundant parentheses [rrp])
= 4 (4 4) 1 (3)
= 4 (256) 1 (2)
= 4 256 1 (rrp)
= 4 256 (3)
= 4256 (2)
= 13 407 807 929 942 597 099 574 024 998 205 846 127 479 365 820 592 393 377 723 561 443 721 764 030 073 546 976 801 874 298 166 903 427 690 031 858 186 486 050 853 753 882 811 946 569 946 433 649 006 084 096 exactly 1.34078079299 10154

With Knuth's arrows: 4 \uparrow \uparrow 3 = 4 \uparrow 4 \uparrow 4 = 4^{256}

2 2 4

= 2 (2) 3 (by 4)
= 2 2 3 (rrp)
= 2 2 2 (4, rrp)
= 2 2 1 (4, rrp)
= 2 2 (3)
= 4 (2) (In fact any chain beginning with two 2s stands for 4.)

2 4 3

= 2 (2 (2 (2) 2) 2) 2 (by 4) The four copies of X (which is 2 here) are in bold to distinguish them from the three copies of q (which is also 2)
= 2 (2 (2 2 2) 2) 2 (rrp)
= 2 (2 (4) 2) 2 (previous example)
= 2 (2 4 2) 2 (rrp) (expression expanded in next equation shown in bold on both lines)
= 2 (2 (2 (2 (2) 1) 1) 1) 2 (4)
= 2 (2 (2 (2 2 1) 1) 1) 2 (rrp)
= 2 (2 (2 (2 2))) 2 (3 repeatedly)
= 2 (2 (2 (4))) 2 (2)
= 2 (2 (16)) 2 (2)
= 2 65536 2 (2,rrp)
= 2 (2 (2 (...2 (2 (2) 1) 1...) 1) 1) 1 (4) with 65535 sets of parentheses
= 2 (2 (2 (...2 (2 (2))...)))) (3 repeatedly)
= 2 (2 (2 (...2 (4))...)))) (2)
= 2 (2 (2 (...16...)))) (2)
= 2^{2^{\dots^2}} (a tower with 216 = 65536 stories) = 655362 (See Tetration)

With Knuth's arrows: 2 \uparrow \uparrow \uparrow 4 = 2 \uparrow \uparrow 2\uparrow \uparrow 2 \uparrow \uparrow 2=2 \uparrow \uparrow 2 \uparrow \uparrow 2 \uparrow 2=2\uparrow \uparrow 2 \uparrow \uparrow 4=2 \uparrow \uparrow 2 \uparrow 2 \uparrow 2 \uparrow 2 = 2 \uparrow \uparrow 65536.

2 3 2 2

= 2 3 (2 3) 1 (by 4)
= 2 3 8 (2 and 3) With Knuth's arrows: 2 8 3 (prop1)
= 2 (2 2 7) 7 (1)
= 2 4 7 (two initial 2's give 4 [prop6]) With Knuth's arrows: 2 7 4 (prop1)
= 2 (2 (2 2 6) 6) 6 (4)
= 2 (2 4 6) 6 (prop6)
= 2 (2 (2 (2 2 5) 5) 5) 6 (4)
= 2 (2 (2 4 5) 5) 6 (prop6)
= 2 (2 (2 (2 (2 2 4) 4) 4) 5) 6 (4)
= 2 (2 (2 (2 4 4) 4) 5) 6 (prop6)
= 2 (2 (2 (2 (2 (2 2 3) 3) 3) 4) 5) 6 (4)
= 2 (2 (2 (2 (2 4 3) 3) 4) 5) 6 (prop6)
= 2 (2 (2 (2 (2 65536 2) 3) 4) 5) 6 (previous example)
= much larger than previous number

With Knuth's arrows: 2 \uparrow^6 2 \uparrow^5 2 \uparrow^4 2 \uparrow^3 2 \uparrow^2 65536.

3 2 2 2

= 3 2 (3 2) 1 (4)
= 3 2 9 (2 and 3)
= 3 3 8 (4)

With Knuth's arrows: 3 \uparrow^8 3.

### Systematic examples

The simplest cases with four terms (containing no integers less than 2) are:

• a \to b \to 2 \to 2 = a \to b \to 2 \to (1 + 1) = a \to b \to (a \to b) \to 1 = a \to b \to a^b = a \uparrow^{a^b} b
(also following from the last-mentioned property)
• a \to b \to 3 \to 2 = a \to b \to 3 \to (1 + 1)
= a \to b \to (a \to b \to (a \to b) \to 1) \to 1 = a \to b \to (a \to b \to a^b) = a \uparrow^{a \to b \to 2 \to 2} b
• a \to b \to 4 \to 2 = a \to b \to (a \to b \to (a \to b \to a^b)) = a \uparrow^{a \to b \to 3 \to 2} b

We can see a pattern here. If, for any chain X, we let f(p) = X \to p then X \to p \to 2 = f^p(1) (see functional powers).

Applying this with X = a \to b, then f(p) = a \uparrow^p b and a \to b \to p \to 2 = a \uparrow^{a \to b \to (p-1) \to 2} b = f^p(1)

Thus, for example, 10 \to 10 \to 3\to 2 = 10 \uparrow ^{10 \uparrow ^{10^{10}} 10} 10 \!.

Moving on:

• a \to b \to 2 \to 3 = a \to b \to 2 \to (2 + 1) = a \to b \to (a \to b) \to 2 = a \to b \to a^b \to 2 = f^{a^b}(1)

Again we can generalize. When we write g_q(p) = X \to p \to q we have X \to p \to q+1 = g_q^p(1), that is, g_{q+1}(p) = g_q^p(1). In the case above, g_2(p) = a \to b \to p \to 2 = f^p(1) and g_3(p) = g_2^p(1), so a \to b \to 2 \to 3 = g_3(2) = g_2^2(1) = g_2(g_2(1)) = f^{f(1)}(1) = f^{a^b}(1)

## Ackermann function

The Ackermann function may be expressed using Conway chained arrow notation:

A(m, n) = (2 (n + 3) (m 2)) 3 for m > 2

hence

2 n m = A(m + 2,n − 3) + 3 for n > 2

(n = 1 and n = 2 would correspond with A(m, −2) = −1 and A(m, −1) = 1, which could logically be added).

## Graham's number

Graham's number G \! itself can not succinctly be expressed in Conway chained arrow notation, but by defining the intermediate function f(n) = 3 \rightarrow 3 \rightarrow n \!, we have: G = f^{64}(4)\, (see functional powers), and 3 \rightarrow 3 \rightarrow 64 \rightarrow 2

Proof: Applying in order the definition, rule 3, and rule 4, we have:

f^{64}(1)\,

= 3 \rightarrow 3 \rightarrow (3 \rightarrow 3 \rightarrow (\cdots (3 \rightarrow 3 \rightarrow (3 \rightarrow 3 \rightarrow 1))\cdots ))\, (with 64 3 \rightarrow 3's)
= 3 \rightarrow 3 \rightarrow (3 \rightarrow 3 \rightarrow (\cdots (3 \rightarrow 3 \rightarrow (3 \rightarrow 3) \rightarrow 1) \cdots ) \rightarrow 1) \rightarrow 1\,
= 3 \rightarrow 3 \rightarrow 64 \rightarrow 2;\,

f^{64}(4) = G;\,

= 3 \rightarrow 3 \rightarrow (3 \rightarrow 3 \rightarrow (\cdots (3 \rightarrow 3 \rightarrow (3 \rightarrow 3 \rightarrow 4))\cdots ))\, (with 64 3 \rightarrow 3's)

f^{64}(27)\,

= 3 \rightarrow 3 \rightarrow (3 \rightarrow 3 \rightarrow (\cdots (3 \rightarrow 3 \rightarrow (3 \rightarrow 3 \rightarrow 27))\cdots ))\, (with 64 3 \rightarrow 3's)
= 3 \rightarrow 3 \rightarrow (3 \rightarrow 3 \rightarrow (\cdots (3 \rightarrow 3 \rightarrow (3 \rightarrow 3 \rightarrow (3 \rightarrow 3)))\cdots ))\, (with 65 3 \rightarrow 3's)
= 3 \rightarrow 3 \rightarrow 65 \rightarrow 2\, (computing as above).

Since f is strictly increasing,

f^{64}(1)

which is the given inequality.

With chain arrows it is very easy to specify a much larger number. For example, note that

3 \rightarrow 3 \rightarrow 3 \rightarrow 3 ~~ = ~~ 3 \rightarrow 3 \rightarrow (3 \rightarrow 3 \rightarrow 27 \rightarrow 2) \rightarrow 2\,

which is much greater than Graham's number.

• Steinhaus Moser notation
• Ackermann function
• Systematically creating ever faster increasing sequences

Source: Wikipedia | The above article is available under the GNU FDL. | Edit this article

 Search for Conway chained arrow notation in Tutorials Search for Conway chained arrow notation in Encyclopedia Search for Conway chained arrow notation in Videos Search for Conway chained arrow notation in Books Search for Conway chained arrow notation in Software Search for Conway chained arrow notation in DVDs Search for Conway chained arrow notation in Store